N06L2

Session: Jun 2006 (session 2)
Wavelength: 18 cm

Comment


To give feedback on this experiment, click

Experiment Feedback

Onsala (Michael Lindqvist at Wed Jun 7 18:12:48 2006) Success :
Error message from Mark 5: 2006.158.17:14:08.04?ERROR m5 -900 Check formatter serial number even 2006.158.17:14:08.04?ERROR m5 -906 MARK5 return code 6: inconsistent or conflicting request Otherwise no known problems.

Medicina (A.Maccaferri at Wed Jun 7 20:48:41 2006) Success :

Urumqi (Zhang Hua at Thu Jun 8 02:17:23 2006) Success :

Torun (K. Borkowski at Thu Jun 8 05:27:11 2006) Success :
No known problems.

Westerbork (Tony Foley at Thu Jun 8 08:54:15 2006) Minor failures : RFI
Wb used in phased array mode. Occasional extremely bad RFI (about 14:40 and 16:30); othewise OK

Effelsberg (dgraham at Thu Jun 8 11:27:51 2006) Minor failures : RFI
RFI 1645.5 and 1647.1 MHz from 14:40 to 15:00 and around 15:40

Hartebeesthoek (Jonathan Quick at Fri Jun 9 14:08:08 2006) Minor failures : RFI
Strong RFI at 1643.03MHz, No other known problems

Noto (P. Cassaro at Sat Jun 17 10:31:51 2006) Minor failures : SCHED
Some source have been reached a little in late.

Jodrell_Bank (Alastair Gunn at Tue Jun 20 09:04:19 2006) Success :
The Lovell Telescope was used (Jb1). No known problems.

EVN experiment feedback facility: entire session

Entire Session

Session: Jun 2006 (session 2)
Wavelengths: 30cm 18/21 5 6 cm

Comment


To give feedback on this entire session, click

Entire Session Feedback

Torun (Kaz Borkowski at Mon Jun 5 12:32:29 2006) Minor failures :
This note concerns the UHF experiments only. Shortly before the first experiment we could manage to install the Lange coupler to produce two circular polarizations instead of the linear polarization announced in the block schedule. Also, we failed to install the phase cal.

Jodrell_Bank (Alastair Gunn at Tue Jun 20 09:14:12 2006) Success : PCAL
The MkII telescope was used (Jb2). During this session the Mk2 phase cal. signal was found to be too high and could not be easily reduced in strength. I therefore switched off the phas cal. signal for the entire session (for Mk2 only).